Stair light kit with 90 cm LED strips
Follow the order steps carefully while you customise your stair lighting kit.
All items that you can add to your cart are in stock and will be shipped with DPD next working day delivery.
Deliveries are free within the UK for orders over £49.
Step 1: Select your controller
Available options:
Synchronised (SCR-1) controller which switches all lights together and is suitable for LED strips up to 200W total (maximum 18m with LED tape SMD 3528 60LED/m with 4,8W/m)
The Cascading (SCR-2) controller switches the lights on in a sequence and suitable for stairways with 2-20 steps (20 x 9.6W total).
Read more about the Controller’s specifications here.
Synchronised (SCR-1) controller
Synchronised (SCR-1) light effect
Cascading (SCR-2) controller
Cascading (SCR-2) light effect
Control Unit
Step 2: Add power supply
Available option:
MeanWell HDR-150-12: 12 V constant voltage power supply. Rated voltage: 135.6W, DIN rail compatible (details)
MeanWell HDR-150-24: 24 V constant voltage power supply. Rated voltage: 135.6W, DIN rail compatible (details)
Our LED strip lights are 12 V, so if you are adding the mini spotlights to your card, select the 12V version of the power supply.
MeanWell HDR-150-12
Power supply
Step 3: Add your motion sensors
You will need to ADD TWO MOTION SENSORS to your order, one for the bottom and one for the top of the stairs.
The motion sensors come with 10m of three-core wire (unless stated otherwise).
reliable activation range: 1 - 1.3 m
Beam angle 20-30 degrees
Our controllers are only guaranteed to work with these motion sensors.
Available options:
Motion Sensor 1
Motion Sensor 2
You can either complete your order by clicking on the cart icon on the top or add further components to your system.
Step 4: Add your lights
Add as many lights as many steps you have. If you require a few spare ones, add those too.
90 cm LED light strips (can be cut shorter at the markings, if required)
Comes with 1m of two-core wire with crimped wire ends
LED types:
SMD 3528 / 2835: 60 LED/m, with 4,8 W/m, 12 V DC
Colour options: Warm white, Neutral White, Cold white
COB led: 320 LED/m with 6 W/m, 12 V DC
Colour option: Neutral White
Warm White
Neutral White
Cold White
LED Strip Light
Step 5: Add your protective profile
Protective aluminium profile for your LED strip lights. Add as many lights
Silver colour only. For other colour options, please contact us (additional colours available for pre-order: white, black, gold,pine, wenge).
90 cm length (can be cut to length using a suitable saw)
Milk diffuser (cover) and end bits are included
Available in three shapes:
Standard
Standard fitting which can be mounted even on finished stairs.
Angular
Mounted in the corner between the stair tread and the riser.
Recessed slim
The profile is hidden in a cut under the step. A popular choice for customers who have not finished their stairs yet.
Protective Profile
Step 6: Add your accessories
Electrical enclosure
410 mm x 210 mm x 100 mm
2 x 8 modules
DIN rail included
Suitable for SCR-1 /SCR-2 controller + power supply + timer
Free next working day delivery for orders over £49 (UK only).
The digital timer is a recommended addition to the Intelligent Stair Lighting set. It switches the stair light’s control unit on or off at selected times or days. This can prevent the stair lights from illuminating during the daytime, when you have sufficient natural light.
Free next working day delivery over £49 (UK only).
Top Hat 35 mm DIN rail
Available in two lengths:
Double-size (21 cm): suitable for mounting the controller + power supply
Triple-size (25 cm): suitable for mounting the controller + power supply + timer
Free next working day delivery for orders over £49 (UK only).
Standard two-core cable for connecting the Intelligent Stair Lighting’s LED light strips to the controller.
Cross-section 2 x 0.45 mm2
This product comes packed by 10 or 50 meters.
Free next working day delivery for orders over £49 (UK only).
The daylight sensor is an optional accessory for the Cascading (SCR-2 version 3) controller
Comes with 3m long wire
Screwdriver included to adjust sensor sensitivity
Free next working day delivery over £49 (UK only).
Standard three-core cable for connecting the Intelligent Stair Lighting’s motion sensors to the controller unit.
Minimum length 5 m
Cross-section 3 x 0.33 mm2
This product comes packed by 5 meters.
Standard three-core cable for connecting the Intelligent Stair Lighting’s motion sensors to the controller unit.
Minimum length 5 m
Cross-section 3 x 0.33 mm2
This product comes packed by 5 meters.
Free next working day delivery over £49 (UK only).
These connectors allow the quick and easy connection of cables without the need for a screwdriver or soldering kit.
This product comes packed in 10 or 50 pieces.
Free next working day delivery over £49 (UK only).
Important notice on your warranty!
Please note that all electrical works must be carried out by a fully qualified, registered electrician in accordance with both the UK 17th Edition Wiring Regulations and the manufacturers' instructions. We are unable to refund or replace any item deemed faulty unless it has been installed by a fully qualified electrician, registered to one of the UK's five trade bodies: NICEIC, NAPIT, ECA, ELECSA, JIB. When returning a faulty item we require full details of the installing electrician in order to verify the integrity of both the installation and electrical wiring system including fuse board and circuit protection devices.
Contact Stellar Lighting
If you have any questions about our fibre optics lights, please do not hesitate to get in touch. Use the form below, or alternatively email info@stellarlighting.co.uk, call us on +44 (0) 20 3239 7033 or WhatsApp message on +44 (0) 7572 555 956.